台式超生喷涂设备 多头超生喷涂设备
超声波涂膜系统是一个精密的适用于各种涂料的可编程喷涂涂料系统。超声波涂膜系统提供了比传统的喷嘴更精确的纳米喷涂。超喷涂头采用超声波能量产生的喷雾和低气压气流进行精确喷涂模式。喷涂的雾化颗粒直径分布均匀细小采用不同的喷头,可以进行大面积喷涂雾化效果稳定,涂敷原料流量变化对雾化效果影响却很小可进行陶瓷、金属、金属盐溶液方面的浆料喷涂不会发生飞雾及反弹。传统喷涂中喷枪的传递效率大约在30%左右,而另外70%左右的涂料随着飞雾散布到周围环境当中。
多种款式雾化喷头,我们公司可以根据客户的要求配套多种喷头。
小型喷头 中型喷头 宽喷头
宽头模式 – 喷头生产模式的宽度成正比,涂层的高度。涂层生产模式在5毫米喷头针尖和基底之间的高度约3毫米。高度为25毫米,产生了25毫米的涂层模式。涂层图案的宽度增加涂料高度的增加。明确界定时,头部靠近基板的涂层图案的边缘。然而,随着高度的增加,涂层图案的边缘有更多的变化,并有“羽状”的外观。
窄模式 – 喷头产生一个5毫米宽涂层沉积涂料的高度在25至35毫米之间的喷头针尖和基底。正如图中所示,涂层图案的边缘上定义的±1毫米。狭窄的模式主要用于电路组装、电极喷涂、特种材料喷涂。数字点胶头生产从5至15毫米的喷嘴与基板之间的高度的1至3毫米的涂层图案。涂层图案的宽度是涂料流量和杆头速度成正比。使用较低的流量和更快的杆头速度产生较窄的模式。
SHIUO的超声波涂层系统已被证明在硅和薄膜太阳能电池制造企业提供各种应用。太阳能玻璃磷酸和硼酸掺杂焊料熔硅太阳能电池CdTe和CIGS电池,缓冲区和窗口层涂料如聚合物和碳纳米管的有机太阳能涂料。 TCO层沉积高温喷雾热解过程。南京仕硕电子的精密喷涂系统具有无堵塞超声波喷嘴技术。我们的超声波喷嘴产生雾化低速统一微米大小的液滴喷雾。这种独特的喷雾,采用非回弹模式,使得95%的超声波喷涂工艺+有效物质的使用。喷涂氧化物的解决方案或纳米颗粒混悬剂时,超声波喷嘴提供了额外的效果,使颗粒均匀悬浮,并打破了颗粒团聚,涂层均匀,连续的超声波振动。除了成本节省层材料,超声波喷涂系统的耗能以及价格远远小于CVD和溅射系统的。
太阳能电池表面喷涂浆料
孙 先生( 经理)
地址:江苏 南京 南京中山北路212号
电话:86-025-83400211
手机:15365104197
邮箱:njshiuo@live.com